Slash commands

Registering slash commands

Discord provides developers with the option to create client-integrated slash commands. In this section, we'll cover how to register these commands using discord.js!

TIP

This page assumes you use the same file structure as our command handling section. The scripts provided are made to function with that setup.

If you already have slash commands set up for your application and want to learn how to respond to them, refer to the following section.

Guild commands

Guild application commands are only available in the guild they were created in, if your application has the applications.commands scope authorized.

In this section, we'll be using a script that is usable in conjunction with the slash command handler from the command handling section.

First off, install the @discordjs/restopen in new window and discord-api-typesopen in new window by running the following command in your terminal:

npm install @discordjs/rest discord-api-types
yarn add @discordjs/rest discord-api-types
pnpm add @discordjs/rest discord-api-types
const { REST } = require('@discordjs/rest');
const { Routes } = require('discord-api-types/v9');
const { token } = require('./config.json');
const fs = require('node:fs');

const commands = [];
const commandFiles = fs.readdirSync('./commands').filter(file => file.endsWith('.js'));

// Place your client and guild ids here
const clientId = '123456789012345678';
const guildId = '876543210987654321';

for (const file of commandFiles) {
	const command = require(`./commands/${file}`);
	commands.push(command.data.toJSON());
}

const rest = new REST({ version: '9' }).setToken(token);

(async () => {
	try {
		console.log('Started refreshing application (/) commands.');

		await rest.put(
			Routes.applicationGuildCommands(clientId, guildId),
			{ body: commands },
		);

		console.log('Successfully reloaded application (/) commands.');
	} catch (error) {
		console.error(error);
	}
})();
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33

Running this script will register all your commands to the guild of which the id was passed in above.

Global commands

Global application commands will be available in all the guilds your application has the applications.commands scope authorized, as well as in DMs.

To deploy global commands, you can use the same script from the guild commands section and adjust the route in the script to .applicationCommands(clientId).

await rest.put(
	Routes.applicationCommands(clientId),
	{ body: commands },
);

 


1
2
3
4

Options

Application commands can have options. Think of these options as arguments to a function. You can specify them as shown below:

const { SlashCommandBuilder } = require('@discordjs/builders');

const data = new SlashCommandBuilder()
	.setName('echo')
	.setDescription('Replies with your input!')
	.addStringOption(option =>
		option.setName('input')
			.setDescription('The input to echo back')
			.setRequired(true));





 
 
 
 
1
2
3
4
5
6
7
8
9

Notice how .setRequired(true) is specified within the options builder. Setting this will prevent the user from sending the command without specifying a value for this option!

Option types

As shown in the options example above, you can specify the type of an ApplicationCommandOption. Listed below are all the possible values you can pass as ApplicationCommandOptionType:

TIP

The slash command builder has a method for each of these types respectively. Refer to the Discord API documentation for detailed explanations on the SUB_COMMAND and SUB_COMMAND_GROUP option typesopen in new window.

  • SUB_COMMAND sets the option to be a subcommand
  • SUB_COMMAND_GROUP sets the option to be a subcommand group
  • STRING sets the option to require a string value
  • INTEGER sets the option to require an integer value
  • BOOLEAN sets the option to require a boolean value
  • USER sets the option to require a user or snowflake as value
  • CHANNEL sets the option to require a channel or snowflake as value
  • ROLE sets the option to require a role or snowflake as value
  • MENTIONABLE sets the option to require a user, role or snowflake as value
  • NUMBER sets the option to require a decimal (also known as a floating point) value
  • ATTACHMENT sets the option to require an attachment

Choices

The STRING and INTEGER option types both can have choices. choices are a set of predetermined values users can pick from when selecting the option that contains them.

WARNING

If you specify choices for an option, they'll be the only valid values users can pick!

Specify them by using the addChoices() method from the slash command builder:

const { SlashCommandBuilder } = require('@discordjs/builders');

const data = new SlashCommandBuilder()
	.setName('gif')
	.setDescription('Sends a random gif!')
	.addStringOption(option =>
		option.setName('category')
			.setDescription('The gif category')
			.setRequired(true)
			.addChoices(
				{ name: 'Funny', value: 'gif_funny' },
				{ name: 'Meme', value: 'gif_meme' },
				{ name: 'Movie', value: 'gif_movie' },
			));









 
 
 
 
 
1
2
3
4
5
6
7
8
9
10
11
12
13
14

Subcommands

Subcommands are available with the .addSubcommand() method:

const { SlashCommandBuilder } = require('@discordjs/builders');

const data = new SlashCommandBuilder()
	.setName('info')
	.setDescription('Get info about a user or a server!')
	.addSubcommand(subcommand =>
		subcommand
			.setName('user')
			.setDescription('Info about a user')
			.addUserOption(option => option.setName('target').setDescription('The user')))
	.addSubcommand(subcommand =>
		subcommand
			.setName('server')
			.setDescription('Info about the server'));





 
 
 
 
 
 
 
 
 
1
2
3
4
5
6
7
8
9
10
11
12
13
14

Replying to slash commands

Discord provides developers the option to create client-integrated slash commands. In this section, we'll cover how to respond to these commands using discord.js!

TIP

You need at least one slash command registered on your application to continue with the instructions on this page. If you haven't done that yet, refer to the previous section.

Receiving interactions

Every slash command is an interaction, so to respond to a command, you need to set up an event listener that will execute code when your application receives an interaction:

client.on('interactionCreate', interaction => {
	console.log(interaction);
});
1
2
3

However, not every interaction is a slash command (e.g. MessageComponents). Make sure to only receive slash commands by making use of the CommandInteraction#isCommand() method:

client.on('interactionCreate', interaction => {
	if (!interaction.isCommand()) return;
	console.log(interaction);
});

 


1
2
3
4

Responding to a command

There are multiple ways of responding to a slash command, each of these are covered in the following segments. The most common way of sending a response is by using the CommandInteraction#reply() method:

WARNING

Initially an interaction token is only valid for three seconds, so that's the timeframe in which you are able to use the CommandInteraction#reply() method. Responses that require more time ("Deferred Responses") are explained later in this page.

client.on('interactionCreate', async interaction => {
	if (!interaction.isCommand()) return;

	if (interaction.commandName === 'ping') {
		await interaction.reply('Pong!');
	}
});
 


 
 
 

1
2
3
4
5
6
7

Restart your bot and then send the command to a channel your bot has access to. If all goes well, you should see something like this:

User used /ping
Guide Bot Bot 08/22/2023
Pong!

You've successfully sent a response to a slash command! This is only the beginning, there's more to look out for so let's move on to further ways of replying to a command!

Ephemeral responses

You may not always want everyone who has access to the channel to see a slash command's response. Thankfully, Discord implemented a way to hide messages from everyone but the executor of the slash command. This type of message is called ephemeral and can be set by using ephemeral: true in the InteractionReplyOptions, as follows:

client.on('interactionCreate', async interaction => {
	if (!interaction.isCommand()) return;

	if (interaction.commandName === 'ping') {
		await interaction.reply({ content: 'Pong!', ephemeral: true });
	}
});




 


1
2
3
4
5
6
7

Now when you run your command again, you should see something like this:

User used /ping
Guide Bot Bot 08/22/2023
Pong!
Only you can see this

Editing responses

After you've sent an initial response, you may want to edit that response for various reasons. This can be achieved with the CommandInteraction#editReply() method:

WARNING

After the initial response, an interaction token is valid for 15 minutes, so this is the timeframe in which you can edit the response and send follow-up messages.

const wait = require('node:timers/promises').setTimeout;

client.on('interactionCreate', async interaction => {
	if (!interaction.isCommand()) return;

	if (interaction.commandName === 'ping') {
		await interaction.reply('Pong!');
		await wait(2000);
		await interaction.editReply('Pong again!');
	}
});
 






 
 


1
2
3
4
5
6
7
8
9
10
11

Deferred responses

As previously mentioned, you have three seconds to respond to an interaction before its token becomes invalid. But what if you have a command that performs a task which takes longer than three seconds before being able to reply?

In this case, you can make use of the CommandInteraction#deferReply() method, which triggers the <application> is thinking... message and also acts as initial response. This allows you 15 minutes to complete your tasks before responding.

const wait = require('node:timers/promises').setTimeout;

client.on('interactionCreate', async interaction => {
	if (!interaction.isCommand()) return;

	if (interaction.commandName === 'ping') {
		await interaction.deferReply();
		await wait(4000);
		await interaction.editReply('Pong!');
	}
});






 
 
 


1
2
3
4
5
6
7
8
9
10
11

If you have a command that performs longer tasks, be sure to call deferReply() as early as possible.

You can also pass an ephemeral flag to the InteractionDeferOptions:

await interaction.deferReply({ ephemeral: true });
1

Follow-ups

Replying to slash commands is great and all, but what if you want to send multiple responses instead of just one? Follow-up messages got you covered, you can use CommandInteraction#followUp() to send multiple responses:

WARNING

After the initial response, an interaction token is valid for 15 minutes, so this is the timeframe in which you can edit the response and send follow-up messages.

client.on('interactionCreate', async interaction => {
	if (!interaction.isCommand()) return;

	if (interaction.commandName === 'ping') {
		await interaction.reply('Pong!');
		await interaction.followUp('Pong again!');
	}
});





 


1
2
3
4
5
6
7
8

If you run this code you should end up having something that looks like this:

User used /ping
Guide Bot Bot 08/22/2023
Pong!
Guide Bot Bot Pong!
Guide Bot Bot 08/22/2023
Pong again!

You can also pass an ephemeral flag to the InteractionReplyOptions:

await interaction.followUp({ content: 'Pong again!', ephemeral: true });
1
User used /ping
Guide Bot Bot 08/22/2023
Pong!
Guide Bot Bot Pong!
Guide Bot Bot 08/22/2023
Pong again!
Only you can see this

That's all, now you know everything there is to know on how to reply to slash commands!

TIP

Interaction responses can use masked links (e.g. [text](http://site.com)) and global emojis in the message content.

Parsing options

Command options

In this section, we'll cover how to access the values of a command's options. Let's assume you have a command that contains the following options:

const { SlashCommandBuilder } = require('@discordjs/builders');

const data = new SlashCommandBuilder()
	.setName('ping')
	.setDescription('Replies with Pong!')
	.addStringOption(option => option.setName('input').setDescription('Enter a string'))
	.addIntegerOption(option => option.setName('int').setDescription('Enter an integer'))
	.addBooleanOption(option => option.setName('choice').setDescription('Select a boolean'))
	.addUserOption(option => option.setName('target').setDescription('Select a user'))
	.addChannelOption(option => option.setName('destination').setDescription('Select a channel'))
	.addRoleOption(option => option.setName('muted').setDescription('Select a role'))
	.addMentionableOption(option => option.setName('mentionable').setDescription('Mention something'))
	.addNumberOption(option => option.setName('num').setDescription('Enter a number'))
	.addAttachmentOption(option => option.setName('attachment').setDescription('Attach something'));





 
 
 
 
 
 
 
 
 
1
2
3
4
5
6
7
8
9
10
11
12
13
14

You can get() these options from the CommandInteractionOptionResolver as shown below:

const string = interaction.options.getString('input');
const integer = interaction.options.getInteger('int');
const boolean = interaction.options.getBoolean('choice');
const user = interaction.options.getUser('target');
const member = interaction.options.getMember('target');
const channel = interaction.options.getChannel('destination');
const role = interaction.options.getRole('muted');
const mentionable = interaction.options.getMentionable('mentionable');
const number = interaction.options.getNumber('num');
const attachment = interaction.options.getAttachment('attachment');

console.log(string, integer, boolean, user, member, channel, role, mentionable, number, attachment);
1
2
3
4
5
6
7
8
9
10
11
12

TIP

If you want the Snowflake of a structure instead, grab the option via get() and access the Snowflake via the value property. Note that you should use const { value: name } = ... here to destructure and renameopen in new window the value obtained from the CommandInteractionOptionopen in new window structure to avoid identifier name conflicts.

Subcommands

If you have a command that contains subcommands, you can parse them in a very similar way as to the above examples. The following snippet details the logic needed to parse the subcommands and respond accordingly using the CommandInteractionOptionResolver#getSubcommand() method:

client.on('interactionCreate', async interaction => {
	if (!interaction.isCommand()) return;

	if (interaction.commandName === 'info') {
		if (interaction.options.getSubcommand() === 'user') {
			const user = interaction.options.getUser('target');

			if (user) {
				await interaction.reply(`Username: ${user.username}\nID: ${user.id}`);
			} else {
				await interaction.reply(`Your username: ${interaction.user.username}\nYour ID: ${interaction.user.id}`);
			}
		} else if (interaction.options.getSubcommand() === 'server') {
			await interaction.reply(`Server name: ${interaction.guild.name}\nTotal members: ${interaction.guild.memberCount}`);
		}
	}
});




 
 
 
 
 
 
 
 
 
 
 


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

Fetching and deleting responses

In addition to replying to a slash command, you may also want to delete the initial reply. You can use CommandInteraction#deleteReply() for this:

await interaction.reply('Pong!');
await interaction.deleteReply();

 
1
2

Lastly, you may require the Message object of a reply for various reasons, such as adding reactions. You can use the CommandInteraction#fetchReply() method to fetch the Message instance of an initial response:

await interaction.reply('Pong!');
const message = await interaction.fetchReply();
console.log(message);
1
2
3

Slash command permissions

Slash commands have their own permissions system, which allows you to set the required permissions in order to use a command.

TIP

The slash command permissions for guilds are only defaults and can be altered by guild administrators.

DM permission

You can use the setDMPermission method to control if a global command can be used in DMs. By default, all global commands can be used in DMs.

const { SlashCommandBuilder } = require('@discordjs/builders');

const data = new SlashCommandBuilder()
	.setName('boop')
	.setDescription('Replies with beep!')
	.setDMPermission(false);





 
1
2
3
4
5
6

Member permissions

You can use the setDefaultMemberPermissions method to set the default permissions required by a member in order to run the command, setting it to 0 will prohibit anyone in a guild from using the command unless a specific overwrite is configured or the user has admin permissions.

TIP

If you want to learn more about the | bitwise OR operator you can check the Wikipediaopen in new window and MDNopen in new window articles on the topic.

const { SlashCommandBuilder } = require('@discordjs/builders');
const { PermissionFlagsBits } = require('discord-api-types/v10');

const data = new SlashCommandBuilder()
	.setName('ban')
	.setDescription('Ban a member!')
	.addUserOption(option =>
		option.setName('target').setDescription('The member to ban'))
	.setDefaultMemberPermissions(PermissionFlagsBits.KickMembers | PermissionFlagsBits.BanMembers);








 
1
2
3
4
5
6
7
8
9

And that's all you need to know on slash command permissions!